Keep your pet in the yard!This easy, do-it-yourself system lets pets roam freely in the outdoor space you designate. The lightweight, 1.5 oz receiver collar fits necks 12 – 20 inches, and can operate up to six months on one set of batteries. The thorough how-to installation video also shows you how to properly install the system and train your pets.Includes:500 ft of wire (covers approx. 1/3 acre, additional boundary kits needed for areas over 1/2 acre)50 flagspatented UltraLight receiver collar with short and long probesadjustable transmitterbatteriesmanualvideo in DVD format.General Info:Will transmit up to 10 acres or 2,800 feet of wireBoundary Control Switch Settings: A= Greater than 2,400, B= up to 1,300, C= 1,300-2,400 feetOne level of correctionShould be installed in a dry and protected environmentBoundary wire must be copper and must be insulatedCan easily use 14-20 gauge wireBoundary Width is 20% Warning Zone and 80% Static Correction ZoneTransmitter Specs:Height: 4.75″”Width: 4.25″”Depth: 2.10″”Frequency: 10.65 kHz Standard, 7kHz alternative availableFlip up front coverDark gray in colorTwo red indicator lights (loop and power)Wire break alarmTwo Boundary Wire terminalsBoundary Width Control KnobABC Boundary Control SwitchAdapter: Model number: RFA-14 (12v A/C, 830 ma)Receiver Collar Specs:Height: .75″”Width: 2″”Depth: .75″”Weight: 1.5 ozUses 6-volt (RFA-67) BatteryWaterproofInterchangeable Contact Points (Long and Short)Concave inside surface (side facing throat)Curved washers to match concave surface<l
